Fix&Go-Adapter Puffer • 2er-Pack (PP09)

Easily adapt the most common round tent poles to fit our Fix&Go Anchor Plate 2.0 and 1.0

Secure your awning effortlessly with the Fix&Go Anchor Plate 2.0 or 1.0. The Fix&Go Adapter bridges the gap between standard round poles and our anchor plates, making awning setup easier and faster.

By replacing the usual end plug on your pole, this adapter fits poles with inner diameters from 18 to 27 mm. Just twist it in by hand and you're ready to go. It is not compatible with the Anchor Plate XL.

Thanks to its compact design, the adapter often stays in the pole and fits neatly into awning cassettes. If needed, it's removable in seconds.

Designed to fit perfectly into the recess of Anchor Plates 1.0 and 2.0, this tool ensures your awning is secured on almost any ground and can be released quickly during sudden weather changes.

Advantages:

• Super light and super strong
• Compact – usually fits into the awning cassette without removal
• Dismantles in seconds
• Fits pole diameters from 18–27 mm (inner)

Set contains:

• 2 x Fix&Go Adapter

Technical Information:

Material: PA, stainless steel
Content: Set of 2
Measurements: 10 x 6.4 x 3 cm
Weight: 0.105 kg

Instructions for Use:

1. Remove black caps from awning pole
2. Insert Fix&Go Adapter, twist clockwise to secure
3. Press orange buttons to open anchor plate sliders
4. Place anchor plate (1.0 or 2.0) on ground
5. Insert pole into plate
6. Close sliders to lock the adapter foot
7. Use Peggy screw pegs to secure plate depending on ground
8. Insert storm hook through square holes and attach guy lines
9. To remove: open sliders and store awning; adapter can remain in pole

Note: The Fix&Go Adapter is not compatible with the Fix&Go Anchor Plate XL.

Videos:

FAQ

What size poles does it fit?

The Fix&Go Adapter is compatible with poles that have an inner diameter of 18 to 27 mm.

How strong is the Puffer adapter?

Although we still need to conduct official strength testing, we have already seen some impressive results with both the 3D printed version and, even more so, with the final product! When properly connected, we couldn’t pull them apart, even with two adults applying full force!

Which Anchor plate does the Puffer adapter fit?

The Anchor plate 2.0 PP16