DO I HAVE TO SCREW THE PEGS ALL THE WAY IN?
No. As long as the thread of the peg is screwed in and underground the pegs are working. If this is the case, move the blue rope clip as close to the ground as you can and snap it into position.
CAN I USE A SOCKET SET TO DRIVE IN THE PEGGY PEGS?
Yes. Any tool with a 17mm hex head can be used to screw the pegs in and out. Some caravan stabiliser legs use a 17mm hex head, but some definitely don’t, you need to check your setup. We DO NOT recommend the use of ‘rattle guns’ or impact drivers, as, to the best of our knowledge, you cannot adjust/reduce the torque settings.
WHAT TORQUE SETTING SHOULD I USE TO PREVENT DAMAGING THE SMALLER PEGS?
We use a Ryobi cordless drill, and keep the torque setting at 20 for the standard peg (PP02) and less for the smaller peg (PP05), due to its narrower shank. Torque settings will be different for different makes of drill. We recommend that you can work your way up the torque settings, until you find the peg flexing (see photo in ‘how to use’ section). You should then remove the drill, and ‘tweak’ the peg by hand – either with the handle of your PP06 Combo Tool – it has a ring spanner built in, or any other 17mm hex head tool.
DOES THE L.D.F. BIG FOOT FIT OVER ALL SIZES OF GAZEBO FEET?
Yes. Every Gazebo we have tried, works well, this includes the popular makes such as Oztrail, Oz Tent Spinifex gazebo, etc. The jaw width of the Big Foot is 70mm and the depth is 75mm to the furthest point.
Check the dimensions of your gazebo leg and foot, and ask us for advice.
WILL THE SMALL PEG (PP05) FIT THROUGH A 10MM EYELET IN MY GROUND SHEET?
Definitely, the Small Peggy Peg (PP05) was predominantly designed for pegging floor matting and ground sheets, to provide a clean working surface outside your caravan and under the awning, but in certain ground conditions, it is an ideal guy rope anchor.
HOW THICK A PIECE OF TARP CAN I USE ON YOUR PEGGY PEG CROCODILE PEGGY CLIPS – THE PP10?
The jaws of the Crocodile Peg are infinitely adjustable, simply screw out the orange cam lever to allow the jaws to open to 10mm or more, once whatever you are trying to hold is in place in the jaws, simply screw in the cam lever, to achieve a good grip when the pressure is applied. But remember, the clip is totally plastic and if excessive force is applied, the cam lever can be broken. Don’t screw the cam leaver until it is tight, it is the action of rolling the cam over (closing the lock) that secures the jaws tight. If it feels like you are applying too much force to close the cam, unscrew the leaver one turn, and try again.
WILL THE L.D.F BIG FOOT WORK IF I CAN’T GET THE BIG PEGS ALL THE WAY IN?
Yep! That’s the beauty of combining the Big Foot with the versatile Peggy Peg tent pegs. The Standard Peg (PP02), big screw in Plastic and Aluminium Pegs PP12 & PP13 and the Hardcore Pegs HP61 all work with the L.D.F Big Foot. And if you are unable to get the peg all the way in, simply move the blue rope clip down the shaft of the peg and clip it into the lowest slot, this will hold the Big Foot firmly on the ground, and nothing is going anywhere.
The L.D.F. Big Foot combines the holding power of 3 pegs, to give an outstanding anchor point, in a multitude of ground conditions, from sand to steel-peg-bending hard compacted rock.
WHAT SIZE IS THE HEAD OF YOUR TENT PEG?
All Peggy Pegs are 17mm hex head. This includes the PP05 Small Peg, PP02 Standard Peg, PP12 Large Plastic Peg, PP13 Large Aluminium Peg, HP61 Hardcore Pegs (hammer in screw out).
WHAT IS THE DIFFERENCE BETWEEN THE LARGE PLASTIC AND ALUMINIUM PEGS?
The difference between the Plastic and Aluminium is the flexibility. The head of the Large Plastic Peg will twist when too much torque is applied indicating that it is probably in far enough, and ready to do its job. The flexibility is also good for windy conditions as the slight flexing works like a spring and eases backwards and forwards rather than rattling the peg and loosening it. The Large Aluminium Peg will go into anything, a lot more torque can be applied to it, to drive it all the way home. The drill will give up before the peg breaks (that said, we have never managed to break a Large Plastic Peg). The Aluminium Peg is also better in rocky ground, loose or hard, but will also work anywhere the plastic one works.
HOW GOOD ARE THE LARGE PLASTIC PEGS IN SAND?
The Large Plastic (and Aluminium) Pegs are excellent in sandy conditions, and for the best results, scoop a handful of the really dry loose sand of the top of the beach and drill into the firmer well compacted slightly damp sub level of sand – we’ve seen people making temporary boat moorings from the large pegs.
DO THE HARDCORE PEGS WORK WELL IN HARD ROCKY GROUND?
Absolutely, check out the short video of the Peggy Peg Toyota Prado winching itself up a small ramp with just one HP61 Hardcore Peg – check it out -https://www.youtube.com/watch?v=1kJ2HcdloGU&feature=youtu.be
CAN I PUT MY SPRING DIRECTLY ONTO THE BLUE ROPE CLIP?
Yes you can, but what I do on my camper trailer awning, is to put the spring at the top of the guy rope, sitting over the top of the pole, and then the loop in the end of the guy rope slips easily and securely over the blue rope clip. If you are unable to do this, it would be best to make a small rope loop through the spring, which can be attached to the blue rope clip. Using rope on the clip will be less stressful in extreme conditions, and will spread the load better than having the spring directly onto the clip.
CAN I MAKE AN EMERGENCY GUY ROPE BY ATTACHING A ROPE TO A TARP WITH A CROCODILE PEG?
Certainly, either pass a rope through the back of the clip, or use it like the blue rope clip on the pegs, by slipping a loop of rope.
WILL THE CROCODILE PEG RIP MY TARP?
The Crocodile Peg is made from reinforced UV resistant plastic and has been designed with no sharp edges, the teeth of the clip are rounded, not jagged and sharp. The reason the clips hold so well is that the jaw pressure can be adjusted to suit the material and conditions, and minimise any potential damage.
DO THE HARDCORE PEGS WORK WITH THE FIX & GO PLATE?
Yes, the Fix & Go Plate has been designed to work with the standard screw in tent peg (PP02) as well as the hammer in screw out Hardcore pegs (HP61) plus, 2 large pegs (PP12) can be used by simply slipping the peg into the cut-out holes in the plate, and drilling into the ground.